Black SUPER Hercules Belt With Metal Keeper (SKU SH510-BK)
Please follow the directions below to figure out your belt size from us. We highly recommend taking a few minutes to measure your belt if at all possible. We have a 0.5% return rate so our method does work well. We do offer returns if you have a sizing issue. Please visit our return policy located on the bottom of our site for more details.
Option 1 (Best Way)
Lay your current belt flat on a smooth surface and measure it from where the buckle attaches to the leather (the fold) to the hole most used. Order that belt size (round up if you measure odd). For example if you measure 37" or 38" to the hole you use, order a 38" belt size.
It doesn't matter if you wear your belt in the last hole, we will make your new belt measure to the center hole.
Option 2 (If you don't have a belt to measure)
Super Hercules Belt™ (Non Leather Belt)
This is the SUPER version that is thicker and stiffer for heavy duty work and gun holster carry.
If you work in the elements and go through belts left and right, this is the belt for you. This belt is built like a tank yet flexible and comfortable to wear.
- 6000 PSI high tensile strength.
- Will not stretch or fold over.
- As stiff as Kydex, makes an amazing work or gun holster belt!
- The Hercules Belt material will not break.
- 5/32" thick yet super strong
- Belt holes will not elongate
- Easy to Clean (wipes clean with dish soap and water).
- Water Proof / Salt Water (Sweat) resistant
- Anti-Microbial, will not retain germs.
- Moisture-resistant / Absorbs Nothing
- Abrasion-resistant / Scratch resistant
- Flexible in all temperatures
- Lightweight yet super strong.
- Will not retain odors
- Will not crack
- With normal use this belt should last a lifetime!
- USA Handcrafted to last.
- The thickness is consistent at approx. 5/32"
- Available in belt sizes 32 to 56 inches.
- Paul Revere Elongated Stainless Steel Roller Buckle (pictured)
- Brushed Nickel Keeper Loop.
- Made with black Chicago screws. Although you can change out the buckle on this belt, your buckle will need to be at least 2" long and have a fatter prong to work on this style belt.
- 1-1/2" wide
- 9 holes, spaced 3/4"
- Creased edge, meaning there is a accent creased line along the sides of the belt.
- USA Made
- Exclusively available at www.BullhideBelts.com
Hercules Belt name and logo are trademarks of Bullhide Belts, LLC. The Hercules mascot and logo are copyrighted and may not be used or reproduced under intellectual property law. All Rights Reserved.
Belt Sizing Directions:
PERFECT FIT METHOD: Lay your current belt flat on a smooth surface and measure it from where the buckle attaches to the leather (the fold) to the hole most used. Order that belt size (round up if you measure odd). For example if you measure 37" or 38", order a 38" belt size.
It doesn't matter if you wear your belt in the last hole, we will make your new belt measure to the center hole as shown in the graphic below.
This is the best method and only takes a moment to measure.
Sizing Notes: Belt size is not the total length of the belt. We have a 0.5% return rate so our method does work well. We do however offer returns if you have a sizing issues. Please visit our return policy page for more details.